One of the most important things that you will need to contemplate before even attempting to install a regular car DVD monitor, or perform a challenging headrest monitor install, is what type of tools will be required for the job. Even though each vehicle and each car monitor system is different there are still some fundamental items you will most likely need to successfully complete the car monitor installation process. The majority of projects you will require needle nose pliers, a flat head screwdriver, a Philips-head screwdriver, and a combination wire crimp and strip tool. Other tools to consider are a panel tool, utility knife, ratchet/socket set, drill/bit set and a torque driver set as well. Keep in mind that this is only a short list of the more basic tools that are needed and numerous other tools may also be needed as you proceed with your install job.
Car Tft Screen
Firstly, you need to begin by thoroughly reading the instructions and make sure to study any schematics supplied with the car DVD monitor to make sure you completely understand the whole process of successfully installing it properly.
Car Tft Screen
Even though there are many makes and models of car DVD monitors on the market, they are still usually composed of 3 essential components. These include the DVD player itself, the LCD or TFT monitor, and the audio system. Furthermore, you will need to understand that there are 4 main different types of installations that will cause you to experience 4 varying degrees of difficulty.
They are as follows:
2 DIN Car Monitor System
The term 'DIN' is actually an internationally accepted standard for in-dash car multimedia units. The number 2 in front of the DIN basically means that it is a standard double deck slot size.
This particular type of system is mounted into the dashboard of a vehicle and will most likely make it slightly more difficult to install, especially if you are attempting to do it from scratch. Since a double DIN car monitor system contains the largest and most aesthetically pleasing screen for your entertainment needs it is probably worth all the effort.
2DIN car monitors, for the most part, are composed of a flat screen and a built-in DVD player. They also have an amplifier built right into the dashboard unit as well. You may discover that more unit mounts and connectors are required to get the car monitor to be seated in its slot snugly. Installation of this popular style of system needs a lot of re-wiring. If the outer edges of the monitor are too large or too small for a non-standard stereo slot then you may have to perform a custom resizing or remodelling of the dash to make sure the unit fits properly without any problems. A good rule of thumb is to double or even triple check the dimensions of your dashboard slot before even buying a brand new car monitor to install. This way you do not waste time or money.
In the process of your car monitor install you will most likely have to run wires from the head unit all the way to the individual speakers in the front, side and rear of your vehicle. All other secondary input devices, such as backup cameras or Bluetooth kits, will also require this. A crucial thing you must account for is to make sure that you are not running a wire to both ends of the emergency break cable since it is considered to be illegal in most countries to be able to operate the monitor when the car is in motion. The only exception to this rule would be that you are running a rear view camera while reversing your car. A final note is that you will also need to wire the car monitor player to the power supply of your vehicle.
1 DIN Car Monitor System
This particular type of car monitor is very much akin to the 2 DIN since it is also mounted into a dashboard and is necessitates a great deal of wiring to have it installed correctly. Be that as it may, the 1DIN car monitor player only takes up ½ of the needed space of a 2DIN unit. Even though it sounds easier to attempt this type of car monitor installation you may need to customize the slot size in the dash to make sure it fits tightly into its designated spot. Similar to the 2 DIN car monitor system it is made up of a color TFT or LCD screen, DVD player and amplifier. All the connections, mounting brackets, and wiring are definitely required but may not always be included by the manufacturer in your purchase.
Alternative Design Car Monitors
This class of car monitors is much less difficult to install than the 1or 2 DIN monitors but it will still pose you with some unique issues. While it is true that you do not need to fit the new electrical components to existing parts of the vehicle you are still required to perform a significant amount of wiring and rewiring to make sure the system is properly hooked up to an adequate power supply and stereo system to maximize your mobile multimedia experience. This type of car monitors installation you will require screws, wires, and adhesive.
For a headrest monitor install you will need to detach the fitted headrest from the seat and run power and connection wires down through the hole. The majority of cars or trucks should allow you to remove the cover off the bottom of the seat and put an unwound clothes hanger up through the slot to locate the cable and pull it out. After that you can run the wire under the carpet to the main head unit in the dashboard or directly to another connection box in another spot in your car.
Other unique car monitors, such as a sun visor DVD monitor or overhead car DVD monitor, will require you to consider other important factors such as how to fix the player to the ceiling of your car and how to wire the DVD monitor so that the cables cannot be seen by the passengers. When mounting the roof monitor you will need to install it in the center of the vehicle for maximum strength. Then you will need to conceal the wires beneath the ceiling panels by running them from the head unit to the dash or power supply. As you can see, this may require a lot of work as some panels and maybe even the seatbelt will have to be removed. Sun visor DVD monitors are not as hard to mount since the wires do not have to be extended too far to be attached to the power source or main adaptor. But they will still need some careful attention when removing and re-attaching car panels.
Clip-On Car Monitors
This one is the simplest and most flexible type of monitor to install when it comes to moving from place to place. They usually include headrest, sun visor and even arm rest car monitors. You should be able to plug a clip-on monitor into a cigarette lighter and clip them onto their designated location.
Now that you have a much better idea of the 4 types of car monitor installations you need to consider some important things.
The provided tips and tricks information is only a tiny portion of the things that you will need to know to aid you in an installation process. Installing a car DVD system is not something to be performed lightly, especially when you are attempting to install a 1 or 2 DIN car monitor or trying to perform a complicated headrest monitor install.
If you are serious about accurately installing a DVD multimedia player, and have the correct resources to attempt it, it is of utmost importance that you work methodically and carefully to avoid any confusion or unnecessary delays.
Some things to consider are:
1. Researching the installation project: Read over and make sure you understand all the instructions for the components you are going to install. A good idea is to go online and search to see if anybody has attempted any wiring plans for your particular vehicle make and model.
2. Prepare for the assignment before you begin: If you are trying to install a 1 or 2 DIN install you will need to ensure you have all the necessary tools, accessories and wires. In addition, you will also need to give yourself a few days without any distractions to thoroughly complete the job.
3. Remove existing components carefully and skilfully: It is important that you do not lose any crucial parts or damage your old stereo system unless you plan to keep the car monitor in your vehicle when you resell it later on. Laying out panels and parts in relation to their location on the car with all their screws on the panel will greatly reduce searching time in your installation process.
4. Keep your work neat and tidy: When wiring or rewiring make sure that the wires themselves are as tight as possible and prevent them from coiling up.
People who rush head first into a car monitor installation project will usually find themselves stuck in a time consuming project which frequently ends up with undesired and often unsafe results.
There is absolutely nothing worse than a vehicle with wires scattered all the way through it. A professional installer would always makes sure that wires were tidied away somewhere behind the paneling of the car in nice neat straight lines. By carefully preparing and taking the time to properly do a car monitor install you can achieve similar results. Also, it is important to be aware of audio and visual problems that could come up from hastily assembled systems. Problems that may arise can include black holes in sound, flickering screens, or loose rattling components just to name a few.
If you don`t take the time to perform a car monitor install correctly it can be a safety hazard to the system, the car and ultimately yourself. If 2 wires are exposed they can short circuit each other and cause your new in-car DVD player to be inoperable. Wires that have been placed too closely together, in a faulty car monitor installation, for too long of a time period will fuse generating a temperature so hot it can combust causing a car fire. So play it safe and follow these helpful tips and strategies in attempting a proper car or headrest monitor install.
Car Monitor Installation Explained
Car Tft Screen
Click for larger image and other views
>> Click here to update Cheapest prices for Pyle PLTS77DU 7-Inch Single-DIN In-Dash Motorized TFT/LCD Touchscreen Monitor Receiver with DVD/CD/MP3/MP4/USB/SD/AM-FM/RDS <<
Pyle PLTS77DU 7-Inch Single-DIN In-Dash Motorized TFT/LCD Touchscreen Monitor Receiver with DVD/CD/MP3/MP4/USB/SD/AM-FM/RDS Feature
- 7'' 16:9 Wide Screen TFT/LCD Display - Picture Control: Brightness/ Contrast/Chroma/Hue - AM/FM-MPX Stereo Radio - Support DVD/VCD/CD/CD-R/CD-RW/MP3 - Front panel AUX Input (Ipod/MP3)
- Motorized Drop Full Detachable Front Panel - Resolution: 1440x234 Pixels/ Brightness : 400nits - Switchable USA/Europe Radio Frequency - Parking Video Output - Subwoofer Output
- Touch Screen (Graphic Screen Allows Easy Control of Operations By Touch) - Electronic Screen Angle/ Position Memory - Clock Function - DSP Equalizer Control/Rock/Classic/Pop - Full Function Wireless Remote
- NTSC PAL Compatible - USB/SD-MMC Reader MP4/JPEG/MP3/WMA Playback - ESP Function Anti-Vibration/Shock Protection - 30 Preset Stations Memory (18FM/12AM) - 320 Watts Total Output (4 x 80 Watts)
- Treble /Bass/Balance/Fader/Encoder/Volume Control - Repeat/Program/Random/Intro Play - Auto Memory Store/Preset/Scan - 4 Channel RCA Preamp Output - UNIT Dimensions: 7.09''W x 7.01''H x 1.97''D
Pyle PLTS77DU 7-Inch Single-DIN In-Dash Motorized TFT/LCD Touchscreen Monitor Receiver with DVD/CD/MP3/MP4/USB/SD/AM-FM/RDS Overview
This in-dash single-DIN headunit has a 7-inch, fully detachable motorized touch-screen display! It's equipped with everything you need to make your vehicle into a mobile entertainment system on wheels: a player that supports AM/FM, DVD, VCD, CD, MP3 CD, SD cards, USB sticks, and a front panel AUX input to conveniently plug in your MP3 player or iPod. You'll be enjoying your favorite movies, TV shows, and video clips on this crystal-clear 1440 x 234 resolution screen in no time. Easily tweak your image and sound using the brightness, contrast, chroma, hue, treble, bass, balance, and fader controls. Store your favorite stations on the 30 presets, or control the balance of your music using the built-in DSP equalizer. Anti-shock protection keeps your multimedia smooth and skip-free. With 80 watts on each of the four channels and subwoofer, this head-unit has power! Control from the backseat using the included fully functional wireless remote. Compatible with both NTSC and PAL.
Pyle PLTS77DU 7-Inch Single-DIN In-Dash Motorized TFT/LCD Touchscreen Monitor Receiver with DVD/CD/MP3/MP4/USB/SD/AM-FM/RDS Specifications
If you're looking for a dependable DVD receiver, the single-DIN Pyle PLTS77DU is a great choice. With a 7-inch touchscreen, USB port, SD/MMC card slot, playback of MPEG4/MP3/WMA/JPEG files, and room to grow, it's a perfect start that won't break the bank.
 A full-featured 1-DIN DVD receiver that won't break the bank. Click to enlarge. |
 Detachable front panel. |
 Full-featured remote included. |
7-Inch Touchscreen
The PLTS77DU features a motorized slide down front panel that reveals a 7-inch, color TFT touchscreen.
Control everything from the brilliant LCD, with complete on-screen controls of DVD and other media.
Your video will look great thanks to the 1440 x 234 pixel resolution.
DVDs and More
Enjoy playback of your favorite DVDs, CDs, and VCDs in the slot-loading DVD player.
Or play back MP3/WMA audio files, MPEG4 video, or view JPEG images from disc, USB, or SD Card.
Dial in your sound with the standard treble, bass, balance and fade controls and DSP equalizer settings.
AM/FM Radio
Listen to your favorite radio programming with the AM/FM Radio with PLL Synthesizer Tuner.
Instantly access your favorite stations with 18 FM and 12 AM presets.
Connectivity
Use the A/V Input to connect external audio and video devices, and use the SD/MMC card slot and USB port to play back your MP3 or MPEG4 files if you don't feel like burning a disc.
Room to Grow
The PLTS77DU packs 320 Watts (4 x 80 Watts), but if you want more you can expand your system thanks to four channels of RCA preamp output and a subwoofer output.
An A/V Output lets you connect an external monitor for the folks in back, and you can also add a rear view camera for safety and convenience.
Wireless Remote Included
Control the action with a handy remote.
What's in the Box
Pyle PLTS77DU Receiver, Remote Control, Installation Hardware, User's Manual
SAVE NOW on the special offers below!
Available In Stock. |
| This Pyle PLTS77DU 7-Inch Single-DIN In-Dash Motorized TFT/LCD Touchscreen Monitor Receiver with DVD/CD/MP3/MP4/USB/SD/AM-FM/RDS ships for FREE with Super Saver Shipping. |
|
Order Now Pyle PLTS77DU 7-Inch Single-DIN In-Dash Motorized TFT/LCD Touchscreen Monitor Receiver with DVD/CD/MP3/MP4/USB/SD/AM-FM/RDS Best Price at Amazon.com
